Introduction
This periodic inspection form is essential for maintaining the safety, reliability, and regulatory compliance of telescopic boom cranes used in construction. It is designed to fulfill OSHA and ASME B30.5 requirements.
Inspection Procedure Overview
- Review manufacturer documentation (manuals, load charts, service history).
- Inspect the carrier chassis, outriggers, and suspension system for wear or damage.
- Check crane superstructure, including swing gear, brakes, and hydraulics.
- Visually inspect all boom sections for cracks, dents, or deformation.
- Thoroughly inspect hoist ropes, sheaves, hook block, and anti-two-block device.
- Test operator cab instruments, control joysticks, and seat belt functionality.
- Confirm safety systems are operational, including LMI, E-stop, and warning devices.
- Perform function testing: boom lift/lower, swing, extend/retract, hoist raise/lower.
- If required, perform static/dynamic load testing and document results.
- Verify availability of up-to-date inspection records and maintenance logs.
Safety Standards Referenced
This inspection form is aligned with:
- OSHA 29 CFR 1926 Subpart CC – Cranes & Derricks in Construction
- ASME B30.5 – Mobile and Locomotive Cranes
- ANSI/ASSE A10.31 – Safety Requirements for Digger Derricks
Final Notes
Ensure every section is fully completed by a qualified inspector. Deficiencies must be addressed prior to equipment use. Maintain copies of this form for compliance records.